Headquarter Munich:
Mehlbeerenstr. 4, 82024 Taufkirchen
Phone: +49 89 679713-0, Fax: -250

Hydraulic Sensors

The stroke measurement of cylinder pistons presents a particular challenge to the sensor technology. WayCon offers a broad product range based on different physical technologies. The solutions shown below, draw wire sensors, magnetostrictive sensors and linear potentiometers are all made for the installation inside of hydraulic cylinders (pressurized area). The only exception is the MOP series for pneumatic cylinders that is made to be installed on the outside of the cylinder, measuring on magnetic pistons without contact.

Draw Wire Sensor SX200
Range max.12 m
Linearity max. ±0.05 %
Output digitalSSI, Profibus, CANopen, Profinet, EtherCAT
Protection classIP65 (optional IP67)
Operating pressure up to 300 bar
Download

Data sheet | CAD-data (on request)

Assembly guide

Range max.15 m
Linearity max. ±0.05 %
Output digitalTTL, HTL, SSI, Profibus, CANopen, DeviceNet, EtherCAT
Protection classIP65 (optional IP67)
Operating pressure up to 300 bar
Download

Data sheet | CAD-data

Assembly guide

Ranges50 - 4000 mm
Resolution10 µm
Linearity max.±0.02 %
Displacement speed< 10 m/s
Analog output0.1 - 10.1 V, 0.1 - 5.1 V, 4 - 20 mA
Digital output start - stop
Voltage supply 24 VDC ±20 %, (12 VDC for output, 0.1...5.1 VDC) output
Protection class IP67
Operating temperatur -30..+90 °C (-30 - 75 °C for FS> 2500 mm)
Operating pressureup to 350 Bar
Magnetic cursor
magnetic cursor
DownloadData sheet | CAD-data
Ranges50 - 900 mm
Resolution max.2 µm
Measured valueposition
Linearity max.±0.2 % (min. ±1 mm)
Displacement speed< 10 m/s
Analog output0.5 - 9.5 V, 4.8 - 19.2 mA
Voltage supply 24 VDC ±20 %
Protection class IP65
Operating temperature 0..+50 °C
Magnetic cursororientation detection of the magnet inside the Zylinder
DownloadData sheet | CAD-data (on-request)
Range50 - 4000 mm
Resolution max.2 µm
Measured valueposition and speed with CANopen
Linearity max.±0.02 %
Displacement speed< 10 m/s
Analog output0 - 10 V, 4 - 20 mA
Digital output SSI, CANopen
Voltage supply 24 VDC ±20 %
Protection class IP67
Operating temperatur -30..+75 °C (-30 - 90 °C for SSI  output)
Operating pressureup to 350 Bar
Magnetic cursor
magnetic cursor or floating cursor for liquids
DownloadData sheet | CAD-data (on request)
TypCylindrical with magnetic drag
Ranges50 - 1000 mm
Linearity max.±0.05 %
Protection classIP67
Displacement speed≤5 m/s
Operating temperature-30 °C..+100 °C (LMI12 up to 250 bar, LME12 up to 20 bar)
MaterialAluminium (LME12)/ stainless steel (LMI12)
DownloadData sheet | CAD-data
TypRectangular with magnetic drag
Ranges50 - 1000 mm
Linearity max.±0.35 %
Protection classIP67
Displacement speed≤5 m/s
Operating temperature / pressure-30 °C..+100 °C (LMI12-SL) / 250 Bar
Material / OutputAluminium / 4...20 mA (LMI-SE)
DownloadData sheet | CAD-data
 
WayCon on FacebookWayCon on TwitterWayCon on YouTube