Encoders and rotary transducers
This sensor class measures angle changes in rotating parts with high precision. The measuring method of the digital encoder is based on periodic tick marks, which are available incrementally as TTL, HTL, or absolutely in the form of bus interfaces (Profibus, SSI, CANopen, Profinet ..). Analog angle sensors, however, convert the angle change that is to be detected into an absolute signal by means of a potentiometer.
Analog Rotary Sensor WP
| Output | 0...10 V, 4...20 mA, Potentiometer |
|---|---|
| Diameter housing | ø40 mm, ø60 mm |
| Protection class | IP67 (housing), up to IP67 (shaft) |
| Shaft | solid shaft |
| Download |
Analog Rotary Sensor WPH
| Output | 0.5...4.5 V, 0...5 V |
|---|---|
| Sensor element | hall effect |
| Diameter housing | ø40 mm, ø60 mm |
| Protection class | IP67 (housing), up to IP67 (shaft) |
| Shaft | solid shaft |
| Download |
Incremental Rotary Transducer WPI
| Output | Line Driver |
|---|---|
| Diameter housing | ø40 mm, ø60 mm |
| Protection class | IP67 (housing), up to IP67 (shaft) |
| Shaft | solid shaft |
| Download | Data sheet | CAD-data | Installation guide |
Incremental Encoders B36 and B58
| Incremental Encoder B36 (ø36) | Incremental Encoder B58 (ø58) |
|---|
| Output | TTL, HTL |
|---|---|
| Signals | A, /A, B, /B, Z, /Z |
| Diameter housing | ø36, ø58 mm |
| Protection class | up to IP67 |
| Shaft | solid shaft, hollow shaft |
| Download | Data sheet B36 | B58 Installation guide B36/B58 Installation guide for B58 Encoder Arm and Measuring Wheels CAD-data B36/B58 |
Analog Absolute Encoder M36 and M58
| Magnet-Encoder M36 (ø36) | Magnet-Encoder M58 (ø58) | |
|---|
| Ouput | 0...5 V, 0...10 V, 4...20 mA |
|---|---|
| Diameter housing | ø36 mm, ø58 mm |
| Protection Class | up to IP67 |
| Shaft | solid shaft, blind hollow shaft |
| Download | Data sheet M36 | M58 |
SSI Absolute Encoder
| Absolute Encoder SSI (ø58) | Absolute Encoder SSI-F36 (ø36) | |
|---|
| Output | SSI (Synchronous Serial Interface) |
|---|---|
| Diameter housing | ø58 mm / ø36 up to ø46 mm (F36) |
| Protection class | up to IP67, optional Ex2/22 |
| Shaft | solid shaft, hollow shaft, hollow through shaft |
| Download |
EtherCAT Absolute Encoder
| Output | EtherCAT (Ethernet for Controller and Automation Technology protocol) |
|---|---|
| Diameter housing | ø58 mm |
| Protection class | up to IP67 |
| Shaft | solid shaft, blind hollow shaft |
| Download | Data sheet | Manual | CAD-data (on request) |
CANopen Absolute Encoder
| Output | CANopen (Controller Area Network protocol) |
|---|---|
| Diameter housing | ø58 mm |
| Protection class | up to IP67 |
| Shaft | solid shaft, blind hollow shaft |
| Download | Data sheet | Manual | CAD-data (on request) |
Profibus Absolute Encoder
| Output | Profibus (Process Field Bus protocol) |
|---|---|
| Diameter housing | ø58 mm |
| Protection class | up to IP67 |
| Shaft | solid shaft, blind hollow shaft |
| Download | Data sheet | Manual | CAD-data (on request) |
Profinet Absolute Encoder
| Output | Profinet (Process Field Network protocol) |
|---|---|
| Diameter housing | ø58 mm |
| Protection class | up to IP67 |
| Shaft | solid shaft, blind hollow shaft |
| Download | Data sheet | Manual | CAD-data (on request) |
Accessories Draw Wire Mechanics Series SX
| Ranges | 1 - 42.5 m |
|---|---|
| Linearity max. | ±0.05 % (with encoder) |
| Temperature range | -20...+85°C (optional -40°C) |
| Download |
