Draw Wire
Sensors
- ranges 50 mm - 42.5 m
- linearity up to ±0.02 %
- resolution up to 17 µm
- output: potentiometric, analog, digital incremental, digital absolute, Bus, tachometer
Inductive Sensors
LVDT
- ranges from 2 mm to 500 mm
- linearity up to ±0.1 %
- resolution up to 0.01 %
- analog output: 0...10 V, 4...20 mA
Laser
Sensors
- ranges 0.5 mm - 150 m
- linearity up to 1 µm
- resolution up to 0.2 µm
- triangulation or optical phase comparison
Linear
Potentiometer
- ranges 10 - 2000 mm
- linearity up to ±0.05 %
- output: potentiometric, analog
- protection class up to IP67
Magnetic
Scales
- Measurement range 0 - 100 m
- Linearity up to ±15 μm
- Accuracy up to 10 μm
- Output: Digital - Incremental
- with and without reference point
Non-Contact
Inductive Sensors
- ranges 24 mm
- linearity up to ±25 µm
- resolution up to 0.012 µm
- analog output: 0...10 V, 4...20 mA, 0...20 mA
Eddy Current
Probe
- Measurement range 0...4 mm
- Linearity up to ±1 %
- Resolution up to 0,4 µm
- Output: analog 0...10V / 0/4...20mA
Magnetostrictive
Transducers
- ranges 50 - 4000 mm
- linearity up to ±0.02 %
- resolution up to 2 µm
- output: analog, SSI, CANopen, tachometer
Encoders &
Rotary Transducers
- singleturn, multiturn
- analog, incremental, digital
- solid shaft, hollow shaft, through hollow shaft
- output: potentiometric, analog, digital incremental, digital absolute, Bus
- rotational measurement
Ultrasonic
Sensors
- ranges 100 - 6000 mm
- linearity up to ±0.3 %
- resolution up to 0.25 mm
- output: analog, proximity switch
Capacitive
Sensors
- ranges 0.05 - 10 mm
- linearity up to ± 0.2 %
- resolution dynamic 0.01 %
- output: analog
- Working temp: -50...+200°C
Digital Length
Gauges
- Measurement range up to 50 mm
- Linearity up to ±0,5 μm
- Resolution up to 0,1 µm
- Output: RS-422
Digital Scales
- Measurement range up to 3040 mm
- Resolution max. 10 μm
- Linearity up to ±0.5 μm
- Output: digital incremental TTL / HTL
Hydraulic Sensors
- Hydraulic Transducer SX200 / SX300
- Magnetostrictive Transducer MSB / MAZ
- Linearpotentiometer LMI12 / LMI12-SE
- Inductive Sensors LVDT LVPH
Signal Conditioner
- DIN rail mounting
- converts potentiometer signals into analog output signals
- Input: 1...20 kOhm
- with cable break detection
Display Controls
- multifunctional display
- input: analog/digital
- 1 - 2 channels
- Scaling and linearisation functions
- output: analog, USB, RS232, RS485 and more
